Smartcards again

People seem to know by now that I have a particular passion for the security devices called smartcards. I’m not sure why myself, to be honest, but a few years ago I decided to look more into this, and nowadays I have three smartcard readers at home connected to the three main computers I use, and I use a FSFe card to store my GnuPG keys and to login to local and remote SSH services.

In Gentoo, unfortunately, most of the smartcard-related software has been vastly ignored for years, or was and still is only considered for the small use cases of developers and users, rather than in the general picture of it all. I have been trying to improve the situation ever since I first experimented with token-based login over one year and a half ago, but even my results are not really good.

The last hard work I did on the subject has been directed toward pcsc-lite improvements which brought me to hack at the code to improve support for two of the three devices I have here: the blutronics bludrive II CCID – which has a firmware quirk, requiring to look up the CCID description in the “wrong place” – and a Broadcom BCM5880 security device that provides dual-interface access to standard smartcards and for contact-less cards as well — I have to thank my trip to London two years ago for having a RFID card available at home to try it out!

Since my personal smartcard setup has been mostly complete and working fine for a while now, I wasn’t planning on working hard on anything in particular for a while, unless, like OpenCryptoki a couple of months ago, my job required me to. On the other hand, after my complaining about stable testing from last week, I started wondering if I couldn’t leverage the work I’ve been doing on OpenCryptoki to allow an easy way to test PKCS#11 software for people without the required hardware devices. Between that and a messed-up bump of OpenSC (0.12.0) in tree, I have been looking hard at the situation again.

Before moving on to describe the recent developments on the topic, though, I’d like to give an insight on why you cannot blame it on anyone in particular if the whole handling of smartcards in Gentoo. The following UML diagram is a schematic, vastly simplified component view of the software (and, very selectively, hardware) involved in smartcard access:

In this diagram, the deep-green interfaces (circles) are those that are standardized by multiple organisations:

The red components are implement as long-running services (daemons) on your Linux (or other Unix) system, the white ones are hardware devices, the blue ones are software libraries and finally the green ones are the applications the users use directly! Almost each one of those components is a standalone package (only package split in two components is GnuPG, and that’s just because Alon’s alternative SCD implementation makes it necessary to explicit the interface providers/consumers there.

This whole complexity not only makes it very difficult for distributions to manage software correctly, but also introduces a number of sensitive points of contacts between the software components, much more than one would like to have in a security-sensitive context such as Smartcards handling. Sometimes I wonder if they are really secure at all.

Back to what I have been doing in Gentoo, though. My first desire was to leverage The tpm-emulator and OpenCryptoki combo to allow arch testers to test PKCS#11 packages, such as pam_pkcs11 and pam_p11 (both of which are not part of the component diagram above by choice: to add those to the diagram, I would have had to add another indirection layer – libpam – to reach an user-accessible application like login) without the need of rare, and expensive, hardware devices. I’ve been working on OpenCryptoki’s ebuild and build system for a while, rewriting its build system and doing other general improvements — unfortunately it seems to me like it still doesn’t work as it is supposed to. I thought it could have been a problem with the software token emulation implementation, so I thought it might have been better to use the emulated TPM device, but even that method is not viable: even the latest version of the package does not seem to build properly against the current 2.6.38 Linux version, let alone the ancient version we have in the tree right now. I have a possibly-working ebuild for the 0.7 series (which uses cmake as basic build system), but since I can’t get the module to build, I haven’t committed it yet. This is likely one good candidate for the Character Device in UserSpace (CUSE) interfaces.

With the emulator being unbuildable, and the software-emulated token seemingly not working, using OpenCryptoki was thus slated for later review. I then switched my focus from that to OpenSC: version 0.12.0 was a major change, but in Gentoo it seems to have been bumped without proper consideration: for instance, the ebuild was committed with an optional pcsc-lite support, but without switches for any other alternative interface, and without any more support for the OpenCT interface that for some devices – including the iKey 3000 device that Gilles provided me with – is the only viable solution. Thanks to Alon (who’s a former Gentoo developer and an upstream developer for OpenCT/OpenSC), I was able to fix this up, and now OpenSC should be properly working in Gentoo — what is not currently implemented is support for non-OpenCT implementations of the CT-API interface; since I don’t know of other software that implements it that are available in Portage; if you know any of those, let me know and I’ll see to add support.

Now, for whatever reason, last time I worked on this, I ended up using pcsc-lite as my main hardware access provider – possibly because it is the easiest way to set it up for GnuPG and OpenPGP – and I didn’t want to throw it off right now, especially since I have a relatively good relationship with Ludovic (upstream) and I had already spent time fixing support for two of my three readers, as I said before. Thankfully, as the diagram suggests, OpenCT not only provides a CT-API interface, but also an IFD one, that can be used with pcsc-lite, providing a layered access to OpenCT-supported readers, including the ikey3k that I have here. Support for that in Gentoo, though, was not really sufficient: OpenCT didn’t install a bundle file for pcscd to discover, and the recent changes to pcscd to run without privileges disallowed the service from accessing the OpenCT sockets — I wouldn’t mind at some point moving all of the daemons to run under the same privileges, but that might not be so good an idea, and definitely not an easy one: while I can easily change the user and group settings that pcscd runs through – thanks to the Gentoo deviation I set the privileges just once, in the pcsc-lite udev rules file – it would probably require a bit of work to make sure that OpenCT and the other smartcard-enabled services didn’t step over each other’s toes. In the ~arch version of the two packages these issues are all solved, and indeed I can access the ikey3k device with pcsc_scan just fine, and from OpenSC as well.

I am unfortunately quite far from making use of the keys stored on the PKCS#11 devices in any other software than the PAM modules I have already written about. Alon’s alternative SCD implementation should make it possible to use any PKCS#11-compatible device (token or smartcard) to handle signatures for GnuPG and keys for SSH. What I’d be interested in, though, would be providing PKCS#11 interface to the OpenPGP card I have already, so to be able to mix devices. This should have been possible with OpenSC, as it implements an interface for openpgp applications and should expose it with PKCS#11 compatibility; reality, though, tends to disagree; I’m not sure whether it is simply a bug in the current code, or OpenPGPv2 cards not being supported by the project. I don’t think I’ll have enough time to work on that code anytime soon.

Alon suggested an alternative approach, by using “Scute’:http://www.scute.org/ — a project that aims at adding PKCS#11 interfaces to OpenPGP cards to be usable with Mozilla products. Unfortunately a quick check shows that the package does not build with the current version of its dependencies. And this is another task that would require me more time than I have, as I ”noted before“:https://flameeyes.blog/2011/04/storing-packing-and-disposing-of and thus will be simply slated for an undefined ”later”.

Exit mobile version